产品描述

NORYL PPO FN215D物性表

NORYL FN215 is a Noryl Engineering structural foam grade fulfilling a wide range of application requirement. Moulded with the recommended blowing agents, this material provides all the performance requirements for computer and business machine housings and cabinets.Its excellent load bearing characteristics allow for a maximum degree of integration. Its properties exceed those of many other thermoplastics and make it highly competitive with traditional materials like metal and wood. FN215 meets the requirements for flammability classification 94 V-0/5V under Underwriters’ Laboratories test UL 94 Standard.

TYPICAL PROPERTIES (1)
MECHANICAL机械性能
Value Unit Standard
Tensile Stress, yield 50 mm/min / 抗张程度,屈服, 50 mm/min
45
MPa
ISO 527
Tensile Stress, break, 50 mm/min / 抗张程度,断裂,50mm/min
40
MPa
ISO 527
Tensile Strain, yield, 50 mm/min / 拉伸伸长,屈服,,50mm/min
3
%
ISO 527
Tensile Strain, break, 50 mm/min / 拉伸伸长,断裂,50mm/min
40
%
ISO 527
Tensile Modulus, 1 mm/min / 拉伸模量,1 mm/min
2100
MPa
ISO 527
Flexural Stress, yield, 2 mm/min / 弯曲强度,屈服,2 mm/min
60
MPa
ISO 178
Flexural Modulus, 2 mm/min / 弯曲模量,2 mm/min
2000
MPa
ISO 178
IMPACT
Value Unit Standard
Charpy Impact, unnotched, 23°C
16
kJ/m2
ISO 179/2C
Gardner Impact (GE)
25 – 35
J
SABIC Method
Izod IMPACT, notched 80*10*4 +23°C / 悬壁梁缺口冲击强度,80*10*4 +23°C
10
kJ/m2
ISO 180/1A
THERMAL
Value Unit Standard
Thermal Conductivity / 导热系数
0.21
W/m-°C
ISO 8302
CTE, 23°C to 80°C, flow
7.E-05 – 8.E-05
1/°C
ISO 11359-2
Vicat Softening Temp, Rate B/120 / 维卡软化温度,B级/120
105
°C
ISO 306
Relative Temp Index, Elec / 相对热指数, 电性能
85
°C
UL 746B
Relative Temp Index, Mech w/impact / 相对热指数,机械冲击性能
85
°C
UL 746B
Relative Temp Index, Mech w/o impact / 相对热指数,非机械冲击性能
85
°C
UL 746B
PHYSICAL
Value Unit Standard
Weight Reduction
23
%
SABIC Method
Specific Gravity/比重
0.88
ASTM D 792
Mold Shrinkage on Tensile Bar, flow (2) / 收缩率,流动
0.6 – 0.9
%
SABIC Method
Density/密度
0.88
g/cm3
ISO 1183
Melt Volume Rate, MVR at 280°C/2.16 kg
10
cm3/10 min
ISO 1133
ELECTRICAL
Value Unit Standard
Relative Permittivity, 1 MHz / 相对介电常数,1 MHz
2.2
IEC 60250
Dissipation Factor, 50/60 Hz / 耗散因素,50/60 Hz
0.0047
IEC 60250
Dissipation Factor, 1 MHz / 耗散因素,1 MHz
0.0039
IEC 60250
FLAME CHARACTERISTICS
Value Unit Standard
UL Recognized, 94V-1 Flame Class Rating (3) / UL认可,94V-1 阻燃等级(3)
3
mm
UL 94
UL Recognized, 94V-0 Flame Class Rating (3) / UL认可,94V-0 阻燃等级(3)
6
mm
UL 94
UL Recognized, 94-5VA Rating (3) / UL认可,94-5VA 阻燃等级(3)
3.9
mm
UL 94
Source GMD, last updated:10/19/1992
Processing
Parameter
Injection Molding
Value Unit
Drying Temperature / 干燥温度
70 – 80
°C
Drying Time / 干燥时间
2 – 3
hrs
Melt Temperature / 熔体温度
270 – 290
°C
Nozzle Temperature / 注嘴温度
250 – 270
°C
Front – Zone 3 Temperature / 前区3温度
270 – 290
°C
Middle – Zone 2 Temperature / 中区2温度
250 – 270
°C
Rear – Zone 1 Temperature / 后区1温度
230 – 250
°C
Hopper Temperature / 料筒温度
60 – 80
°C
Mold Temperature / 模具温度
60 – 80
°C
Source GMD, last updated:10/19/1992