产品描述

CYCOLOY PC/ABS C4220K物性表

Cycoloy* C4220K resin is an injection moldable 20% glass reinforced non FR PC-ABS. Key features include improved Knit Line strength, good flow, excellent strength & rigidity, heat resistance & hydrolytic stability. Ideal for small to medium size & thin wall applications that required rigid frame for reinforcement with good Knit Line strength.

TYPICAL PROPERTIES (1)
MECHANICAL机械性能
Value Unit Standard
Tensile Stress, yield 5 mm/min / 抗张程度,屈服, 5 mm/min
95
MPa
ISO 527
Tensile Stress, break, 5 mm/min / 抗张程度,断裂,5mm/min
95
MPa
ISO 527
Tensile Strain, yield, 5 mm/min / 拉伸伸长,屈服,5mm/min
2.5
%
ISO 527
Tensile Strain, break, 5 mm/min / 拉伸伸长,断裂,5mm/min
2.5
%
ISO 527
Tensile Modulus, 1 mm/min / 拉伸模量,1 mm/min
6000
MPa
ISO 527
Flexural Stress, yield, 2 mm/min / 弯曲强度,屈服,2 mm/min
125
MPa
ISO 178
Flexural Modulus, 2 mm/min / 弯曲模量,2 mm/min
5400
MPa
ISO 178
Hardness, Rockwell L
96
ISO 2039-2
Hardness, Rockwell R / 硬度, 洛氏 R
119
ISO 2039-2
IMPACT
Value Unit Standard
Izod Impact, unnotched, 23°C / 无缺口悬臂梁冲击 23°C
550
J/m
ASTM D 4812
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C
100
J/m
ASTM D 256
Izod IMPACT, unnotched 80*10*3 +23°C
25
kJ/m2
ISO 180/1U
Izod IMPACT, notched 80*10*3 +23°C / 悬壁梁缺口冲击强度, 80*10*3 +23°C
10
kJ/m2
ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm / 简支梁缺口冲击强度,23°C,C80*10*3 sp=62mm
10
kJ/m2
ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
25
kJ/m2
ISO 179/1eU
THERMAL
Value Unit Standard
HDT, 0.45 MPa, 3.2 mm, unannealed / 热变形温度,0.45 MPa, 3.2 mm,未退火
138
°C
ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed / 热变形温度,1.82 MPa, 3.2mm,未退火
130
°C
ASTM D 648
Thermal Conductivity / 导热系数
0.2
W/m-°C
ISO 8302
CTE, -40°C to 40°C, flow / 线形膨胀系数,-40°C 到40°C,流动
2.62E-05
1/°C
ISO 11359-2
CTE, -40°C to 40°C, xflow / 线形膨胀系数,-40°C 到40°C,横向
8.16E-05
1/°C
ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C
pass
IEC 60695-10-2
Vicat Softening Temp, Rate B/50 / 维卡软化温度 B级/50
135
°C
ISO 306
Vicat Softening Temp, Rate B/120 / 维卡软化温度,B级/120
137
°C
ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm / 热变形温度,0.45 MPa, 未退火, 100 mm 跨距
135
°C
ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm / 热变形温度,1.8 MPa, 未退火, 100 mm 跨距
129
°C
ISO 75/Ae
PHYSICAL
Value Unit Standard
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量,流动,3.2 mm(5)
0.2 – 0.4
%
SABIC Method
Melt Flow Rate / 熔流率, 260°C/5.0 kgf
12
g/10 min
ASTM D 1238
Density/密度
1.3
g/cm3
ISO 1183
Water Absorption, (23°C/sat) / 吸水率, (23°C/sat)
0.6
%
ISO 62
Moisture Absorption (23°C / 50% RH) / 吸水率, 平衡,(23°C / 50% RH)
0.12
%
ISO 62
Melt Volume Rate, MVR at 260°C/5.0 kg / 溶化体积流率,MVR, 260°C/5.0 kg
11
cm3/10 min
ISO 1133
ELECTRICAL
Value Unit Standard
Volume Resistivity/体积电阻率
3.5E+16
Ohm-cm
ASTM D 257
Surface Resistivity
3.5E+16
Ohm
ASTM D 257
Dielectric Strength, in oil, 0.8 mm / 耐电强度,在油中,0.8mm
40
kV/mm
IEC 60243-1
Dielectric Strength, in oil, 1.6 mm / 耐电强度,在油中,1.6mm
30
kV/mm
IEC 60243-1
Relative Permittivity, 1 kHz
3.4
IEC 60250
Relative Permittivity, 1 MHz / 相对介电常数,1 MHz
3.3
IEC 60250
Dissipation Factor, 1 kHz
0.008
IEC 60250
Dissipation Factor, 1 MHz / 耗散因素,1 MHz
0.011
IEC 60250
Source GMD, last updated:2009/08/18
Processing
Parameter
Injection Molding
Value Unit
Drying Temperature / 干燥温度
100 – 110
°C
Drying Time / 干燥时间
2 – 4
hrs
Melt Temperature / 熔体温度
240 – 280
°C
Mold Temperature / 模具温度
50 – 80
°C
Source GMD, last updated:2009/08/18